TL-IS100-14L2G is a TP-LINK industrial Ethernet switch designed for industrial environments. It provides 14 100 Gigabit adaptive Ethernet interfaces and 2 Gigabit adaptive Ethernet interfaces. It provides 14 Gigabit adaptive RJ45 ports and 2 Gigabit adaptive RJ45 ports Industrial working temperature: -40°C~75°C Wide voltage input: 9.6V~60VDC Small size (137 mm *100 mm *38 mm), better adaptable to industrial environment Multiple installation methods: rail installation + wall mounting IP30 protection: reduce the impact of dust VLAN and broadcast storm suppression switches are provided to adapt to various complex network environments Aluminum alloy shell, conformal coating protection, strong and durable Three-way power input, redundant backup, greatly improve the reliability of product power supply EMC high protection level, not afraid of all kinds of harsh environments *The industrial switch is not equipped with a power supply at the factory, if you need to use the power supply, please purchase it separately It is recommended to buy our industrial-grade power supply: TL-IP75-24 or TL-IP75D-24 -40°C~75°C working temperature design, no fear of extreme temperatures TL-IS100-14L2G Ethernet switch is designed in strict accordance with the working temperature of -40°C~75°C, selects industrial-grade devices, and adopts natural heat dissipation mode to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments. Industrial-grade protection design High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants. Aluminum alloy shell and electroless nickel gold PCB board greatly improve the anti-corrosion performance of the equipment. The housing can be protected by IP30 to reduce the impact of dust on the normal operation of the equipment. 9.6V~60VDC wide voltage input, multiple power protection It supports simultaneous access of three power supplies, and the power supply is redundant to ensure the uninterrupted work of the equipment. It supports a wide voltage input of 9.6V~60VDC, and is suitable for various industrial power supplies. Three types of power protection are provided to greatly improve the reliability of power supply to the switch. Featured devices The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties. Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product. The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment. TP-LINK's rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment. Compact body design, metal shell, efficient heat dissipation The size of the fuselage is only 137mm*100mm*38mm, which can be very convenient to place in a compact work cabinet, and the high thermal conductivity aluminum alloy shell has better heat dissipation effect. DIN rail installation is easy and flexible The TL-IS100-14L2G can be easily mounted on DIN rails and wall-mounted, and can be flexibly selected according to your needs, making the use of industrial-grade Ethernet switches simple and reliable. Excellent device compatibility TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment.

TL-IS200-4G2SC is a TP-LINK industrial Ethernet switch designed for industrial environments, providing 4 Gigabit adaptive Ethernet interfaces and 2 pairs of Gigabit single-mode dual-fiber SC fiber ports. 4 x 10/100/1000M adaptive RJ45 ports 2 pairs of 1000M single-mode dual-fiber SC fiber ports Operating wavelength: 1310nm Optical fiber transmission distance: 20km Industrial working temperature: -40°C~75°C Wide voltage input: 9.6V~60VDC Three-way power input, redundant backup, greatly improve the reliability of product power supply Compact aluminum alloy body (137mm *100mm *38mm), better adapt to industrial environment IP30 protection: reduce the impact of dust Conformal coating protection to improve the reliability of industrial-grade products EMC high protection level, not afraid of all kinds of harsh environments Multiple installation methods: rail installation + wall mounting VLAN and WEB management switches are provided to adapt to various complex network environments ERPS ring network protocol, RPL configuration *The industrial switch is not equipped with a power supply at the factory, if you need to use the power supply, please purchase it separately It is recommended to buy our industrial grade power supply: TL-IP75-24 or TL-IP75D-24 -40°C~75°C working temperature design, no fear of extreme temperatures TL-IS200-4G2SC is designed in strict accordance with the working temperature of -40°C~75°C, selects industrial-grade devices, and adopts natural heat dissipation mode to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments. The ERPS ring network protocol provides fast protection at the level of 5 0ms The ERPS ring protocol is a protection protocol with too many rings. It can be single-ring and double-ring networking, and supports fast ring network (fault self-healing time

TL-IS200-5G is a TP-LINK industrial Ethernet switch designed for industrial environments. Provides 5 Gigabit adaptive Ethernet interfaces. Provide 5 x 10/100/1000M adaptive RJ45 ports Industrial operating temperature: -40°C~75°C(85°C@80LFM) Wide voltage input: 9.6V~60VDC Compact body (90mm *75mm *20mm), better adapt to industrial environment IP40 protection: reduces the impact of dust Conformal coating protection to improve the reliability of industrial-grade products EMC high protection level, not afraid of all kinds of harsh environments Easy and flexible installation: DIN rail mounting VLAN and WEB management switches are provided to adapt to various complex network environments *The industrial switch is not equipped with a power supply at the factory, if you need to use the power supply, please purchase it separately It is recommended to buy our industrial grade power supply: TL-IP75-24 or TL-IP75D-24 -40°C~75°C working temperature design, no fear of extreme temperatures TL-IS200-5G is designed in strict accordance with the working temperature of -40°C~75°C, selects industrial-grade devices, and adopts natural heat dissipation mode to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments. Industrial-grade protection design High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants. Metal shell, electroless nickel gold PCB board, greatly improve the anti-corrosion performance of the equipment. The housing can be protected by IP40 to reduce the impact of dust on the normal operation of the equipment. Conformal coating protection to improve the reliability of industrial-grade products. 9.6V~60VDC wide voltage input It supports a wide voltage input of 9.6V~60VDC, and is suitable for various industrial power supplies. Three types of power protection are provided to greatly improve the reliability of power supply to the switch. Featured devices The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties. Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product. TP-LINK's rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment. Compact body design, metal shell, efficient heat dissipation The size of the body is only 90mm*75mm*20mm, which can be easily placed in a compact work cabinet, and the high thermal conductivity metal shell has better heat dissipation effect. DIN rail installation is easy and flexible The TL-IS200-5G can be easily mounted on a DIN rail, making the use of industrial-grade Ethernet switches simple and reliable. Excellent device compatibility TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment. Port interrupt alarm, real-time monitoring of port working status The TL-IS200-5G provides port alarm function to monitor the working status of the port in real time. Simple and practical network management functions It supports the management and maintenance of the device through the web interface and PC management software. 802.1Q VLAN, MTU VLAN, and port VLAN are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and three priority modes based on ports, 802.1P, and DSCP to optimize bandwidth configuration. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. Port mirroring is supported, and data from a port is forwarded to the mirrored port for network monitoring. Port monitoring is supported, and the traffic information of each port is counted to facilitate traffic monitoring and network anomaly analysis. It supports bandwidth control, configures port data input/output transmission rates, and reasonably allocates and utilizes bandwidth. Storm suppression is supported to limit the broadcast traffic allowed to be received by the port to prevent broadcast storms from seriously slowing down network performance.

TL-IS200-8G4F is a TP-LINK industrial Ethernet switch designed for industrial environments. Provides 8 Gigabit adaptive Ethernet interfaces and 4 Gigabit SFP ports. Eight 10/100/1000M adaptive RJ45 ports are provided Provide 4 x 100/1000M SFP ports Industrial operating temperature: -40°C~70°C(75°C@80LFM) Wide voltage input: 9.6V~60VDC Three-way power input, redundant backup, greatly improve the reliability of product power supply ERPS ring network protocol, RPL configuration Compact aluminum alloy body (137mm *100mm *38mm), better adapt to industrial environment IP30 protection: reduce the impact of dust Conformal coating protection to improve the reliability of industrial-grade products EMC high protection level, not afraid of all kinds of harsh environments Easy and flexible installation: DIN rail mounting, wall mounting VLAN and WEB management switches are provided to adapt to various complex network environments *The industrial switch is not equipped with a power supply at the factory, if you need to use the power supply, please purchase it separately It is recommended to buy our industrial grade power supply: TL-IP75-24 or TL-IP75D-24 -40°C~75°C working temperature design, no fear of extreme temperatures TL-IS200-8G4F is designed in strict accordance with the working temperature of -40°C~75°C (ambient wind speed 80LFM) and -40°C~70°C (natural heat dissipation), and selects industrial-grade devices to ensure that the equipment works stably for a long time in this temperature range and meets all kinds of harsh environments. Industrial-grade protection design High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants. Electroless nickel gold PCB board greatly improves the corrosion resistance of the equipment. Conformal coating protection to improve the reliability of industrial-grade products. 9.6V~60VDC wide voltage input It supports simultaneous access of three power supplies, and the power supply is redundant to ensure the uninterrupted work of the equipment. It supports a wide voltage input of 9.6V~60VDC, and is suitable for various industrial power supplies. Three types of power protection are provided to greatly improve the reliability of power supply to the switch. Featured devices The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties. Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product. The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment. TP-LINK's rigorous industrial-grade production and testing process is adopted to effectively release the electrical stress of components and greatly improve the reliability of equipment. Compact body design, aluminum alloy shell, efficient heat dissipation The size of the body is only 137mm *100mm *38mm, which can be easily placed in a compact work cabinet, and the high thermal conductivity aluminum alloy shell has better heat dissipation effect. DIN rail installation is easy and flexible The TL-IS200-8G4F can be easily DIN rail mounted and wall-mounted, making the use of industrial-grade Ethernet switches simple and reliable. Excellent device compatibility TP-LINK has more than 100 million Ethernet switch devices running all over the world, serving all walks of life, ensuring that TP-LINK Ethernet switches can be compatible with all kinds of network equipment and production equipment. Port interrupt alarm, real-time monitoring of port working status The TL-IS200-8G4F provides port alarm function to monitor the working status of the port in real time. Simple and practical network management functions It supports the management and maintenance of the device through the web interface and PC management software. 802.1Q VLAN, MTU VLAN, and port VLAN are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and three priority modes based on ports, 802.1P, and DSCP to optimize bandwidth configuration. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. Port mirroring is supported, and data from a port is forwarded to the mirrored port for network monitoring. Port monitoring is supported, and the traffic information of each port is counted to facilitate traffic monitoring and network anomaly analysis. It supports bandwidth control, configures port data input/output transmission rates, and reasonably allocates and utilizes bandwidth. Storm suppression is supported to limit the broadcast traffic allowed to be received by the port to prevent broadcast storms from seriously slowing down network performance.

TL-IS500P-12L4G-TN is a Layer 3 managed industrial PoE switch specially designed and developed EN50155 by TP-LINK for rail transit, shipbuilding, vehicle communication and other applications. Tight and secure connections with M12 connectors allow them to work reliably even in the face of environmental factors such as vibration and shock. Provide 4 x 10/100/1000M adaptive M12 ports (8pin, A-code, female) 12 x 10/100M adaptive M12 ports (4pin, D-code, female) 1 x M12 power port with dual redundant power inputs (4pin, A-code, male) EN50155 standard shock and vibration resistance, IP66 industrial protection level, dustproof and waterproof Operating temperature: -40°C~50°C (full load PoE output) Dual redundant wide voltage input: 48V~154VDC, which greatly improves the reliability of product power supply It supports the IEEE802.3af/at standard, and the maximum PoE output of a single port can reach 30W, and the maximum PoE output power of the whole machine is 120W Multiple installation methods: rail installation + wall mounting It supports remote management of TP-LINK commercial cloud platform and mobile APP management Layer 3 routing protocol, complete security protection mechanism, and perfect ACL/QoS policy EMC high protection level, not afraid of all kinds of harsh environments *This model does not come with power supply/wiring at the factory, so it needs to be purchased separately; It is recommended to buy our industrial-grade power supply: TL-P160-54 industrial-grade It meets EN50155 standards and is suitable for applications in rail vehicles, ships and other fields The M12 connector is tightly and firmly connected, which can also ensure the stable operation of network equipment in high-vibration and high-impact environments, and has the ability to operate under extreme altitude, temperature and humidity, and can adapt to different environmental differences such as shock, vibration, surge and electrical performance, making it an ideal choice for various industrial applications. IEC/EN 61000-4 high standard industrial grade protection, IP66 dust and water resistance High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants. The metal shell, M12 aviation joint, and internal glue pouring greatly improve the anti-corrosion performance of the equipment. IP66 dustproof and waterproof to meet the needs of harsh industrial environments. 48V~154VDC wide voltage input, multiple power protection It supports two power supplies to be connected at the same time, and the power supply is redundant to ensure the uninterrupted work of the equipment. It supports a wide voltage input of 48V~154VDC, and is suitable for various industrial power supplies. Three types of power protection are provided to greatly improve the reliability of power supply to the switch. Selected devices, with high standards of system design and production control The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties. Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product. The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment. TP-LINK's rigorous industrial-grade production and testing process is adopted to greatly improve the reliability of the equipment. Compact metal body, rugged and efficient The size of the TL-IS500P-12L4G-TN is only 255mm*174mm*67mm, which can be easily installed in a compact distribution box. The housing is designed to dissipate heat naturally, so it can be protected without a fan The product is stable and quiet, noiseless and quiet, and adapts to various harsh industrial environments. Three-layer network management function, powerful business processing capabilities It supports the RIP dynamic routing protocol, dynamically generates and updates routing tables, and solves the routing problem of small and medium-sized networks after subnets are divided. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. IPv6 is supported to meet the requirements of network transition from IPv4 to IPv6. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. Easy operation and maintenance Supports various management and maintenance methods, such as web management and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and tracert detection, making it easy to analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

The TL-MC210CS is a gigabit single-mode dual-fiber optical transceiver, providing a 1000Mbps electrical port and a pair of 1.25Gbps SC optical ports, which can convert the electrical port signal to the optical port signal and transmit data over long distances through optical fiber. The TL-MC210CS adopts a standard SC interface, with a working wavelength of 1310nm, single-mode and dual-fiber transmission, and a maximum distance of 20 kilometers. 1 pair of Gigabit SC optical ports and 1 Gigabit RJ45 network port Single-mode and dual-fiber transmission, with a maximum transmission distance of 20 kilometers Operating wavelength: 1310nm

The "Bluetooth × Cloud Switching Series" fully gigabit cloud management switch newly developed and launched by TP-LINK provides strong applicability, flexible and fast local management, and efficient, simple and easy-to-use remote management. Using a new generation of high-performance hardware and software platform, with functions such as intelligent deployment, abnormal alarm, VLAN configuration, and port aggregation, it can be easily used by novices without the need for professional IT O&M personnel, and is suitable for network access in application scenarios such as campuses, hotels, and enterprise campuses. 16 x 10/100/1000Base-T RJ45 ports 2 x 1000Mbps SFP ports Compliant with IEEE 802.3af/at PoE power supply standard Support remote management of business cloud APP and web Support Bluetooth connection on the business cloud APP side, and disconnect network operation and maintenance It supports intelligent deployment, abnormal alarms, and fast troubleshooting It supports three working modes: cloud management, VLAN isolation, and standard switching It supports a maximum PoE power of 180 W and a maximum PoE power of 30 W per port 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port monitoring, port traffic statistics, cable detection, and loopback protection Full Gigabit ports The TL-NS620-16GP2F provides 16 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. Bluetooth deployment, no network O&M Paired with the Shangyun app through the Bluetooth transmission protocol, it can be configured without network conditions Support APP for device management, O&M only needs a mobile phone, and on-site troubleshooting is easy and convenient Quickly add devices and automatically configure networking It provides several ways to add devices, such as device ID filling, MAC address input, QR code scanning, LAN discovery, etc Quickly identify other devices connected to the switch, realize automatic networking, intelligent deployment, and graphical topology, which is clear, intuitive, delicate and vivid View port status in real time, and push alarm exceptions in real time Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance The abnormal status of the switch network is reported in real time, and the fault location is highlighted at a glance, reducing the difficulty of troubleshooting and greatly improving the operation and maintenance efficiency The port can be restarted remotely to solve the problem of PoE terminal downtime with one click When the PoE terminal is down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step. Standard PoE power supply function Ports 1~16 of the TL-NS620-16GP2F support PoE+ power supply and comply with the IEEE 802.3af/at standard to meet the needs of various PoE power supply scenarios such as visual security, conference calling, and wireless coverage. The maximum PoE power supply power of the TL-NS620-16GP2F is 180W, and the maximum PoE power supply power of a single port is 30W. Port aggregation for automatic detection and elimination of loops Trunk port aggregation doubles the uplink rate. Intelligent loop protection detects the network topology and repairs loops immediately after they are discovered, effectively preventing network congestion and faults caused by loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and optimizes bandwidth configuration based on three priority modes: port, 802.1p, and DSCP. Port monitoring is supported, and data packets from the monitored port are copied to other ports for network monitoring. Supports port aggregation, increases link bandwidth, implements link backup, and improves link reliability. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLANs, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud APP, commercial cloud platform, and local web. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

The "Bluetooth × Cloud Switching Series" fully gigabit cloud management switch newly developed and launched by TP-LINK provides strong applicability, flexible and fast local management, and efficient, simple and easy-to-use remote management. Using a new generation of high-performance hardware and software platform, with functions such as intelligent deployment, abnormal alarm, VLAN configuration, and port aggregation, it can be easily used by novices without the need for professional IT O&M personnel, and is suitable for network access in application scenarios such as campuses, hotels, and enterprise campuses. 24 x 10/100/1000Base-T RJ45 ports 2 x 1000Mbps SFP ports Compliant with IEEE 802.3af/at PoE power supply standard Support remote management of business cloud APP and web Support Bluetooth connection on the business cloud APP side, and disconnect network operation and maintenance It supports intelligent deployment, abnormal alarms, and fast troubleshooting It supports three working modes: cloud management, VLAN isolation, and standard switching It supports a maximum PoE power of 225W and a maximum PoE power of a single port of 30W 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port monitoring, port traffic statistics, cable detection, and loopback protection Full Gigabit ports The TL-NS620-24GP2F provides 24 x 10/100/1000Mbps RJ45 ports and 2 x 1000Mbps SFP ports. All ports have gigabit wire-speed forwarding capability to meet the needs of different users. Bluetooth deployment, no network O&M Paired with the Shangyun app through the Bluetooth transmission protocol, it can be configured without network conditions Support APP for device management, O&M only needs a mobile phone, and on-site troubleshooting is easy and convenient Quickly add devices and automatically configure networking It provides several ways to add devices, such as device ID filling, MAC address input, QR code scanning, LAN discovery, etc Quickly identify other devices connected to the switch, realize automatic networking, intelligent deployment, and graphical topology, which is clear, intuitive, delicate and vivid View port status in real time, and push alarm exceptions in real time Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance The abnormal status of the switch network is reported in real time, and the fault location is highlighted at a glance, reducing the difficulty of troubleshooting and greatly improving the operation and maintenance efficiency The port can be restarted remotely to solve the problem of PoE terminal downtime with one click When the PoE terminal is down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step. Standard PoE power supply function Ports 1~24 of the TL-NS620-24GP2F support PoE+ power supply and comply with the IEEE 802.3af/at standard to meet the needs of various PoE power supply scenarios such as visual security, teleconferencing, and wireless coverage. The maximum PoE power supply power of the TL-NS620-24GP2F is 225W, and the maximum PoE power supply power of a single port is 30W. Port aggregation for automatic detection and elimination of loops Trunk port aggregation doubles the uplink rate. Intelligent loop protection detects the network topology and repairs loops immediately after they are discovered, effectively preventing network congestion and faults caused by loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and optimizes bandwidth configuration based on three priority modes: port, 802.1p, and DSCP. Port monitoring is supported, and data packets from the monitored port are copied to other ports for network monitoring. Supports port aggregation, increases link bandwidth, implements link backup, and improves link reliability. One-click to switch working modes Cloud management mode: The switch supports network management functions such as VLANs, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud APP, commercial cloud platform, and local web. VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other. Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely.

5 x 10/100/1000/2500Mbps adaptive RJ45 ports All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported Support MAC address self-learning and full-duplex working mode Desktop molded housing, plug and play, no management required

TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 5 x 10/100/1000/2500Mbps RJ45 ports (ports 1~4 support standard PoE+ power supply) 1 x 1/2.5/10Gbps SFP+ port The maximum PoE power supply power of the whole machine is 55 W, and the maximum PoE power supply power of a single port is 30 W Compliant with IEEE 802.3af/at PoE power supply standard, the port supports power supply priority Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 2.5G port The TL-SE2106P provides five 10/100/1000/2500Mbps RJ45 ports and one 1/2.5/10Gbps SFP+ port. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. Supports standard PoE+ power supply function TL-SE2106P ports 1~4 support PoE+ power supply, follow the IEEE 802.3af/at standard, and meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SE2106P is 55W, and the maximum PoE power supply power of a single port is 30W. Supports fast PoE and permanent PoE. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 5 x 10/100/1000/2500Mbps RJ45 ports (ports 1~4 support standard PoE++ power supply) 1 x 1/2.5/10Gbps SFP+ port The maximum PoE power supply power of the whole machine is 118W, and the maximum PoE power supply power of a single port is 90W Compliant with IEEE 802.3af/at/bt PoE power supply standards, the port supports power supply priority Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 2.5G port The TL-SE2106PB provides five 10/100/1000/2500Mbps RJ45 ports and one 1/2.5/10Gbps SFP+ port. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. Supports standard PoE++ power supply function TL-SE2106PB ports 1~4 support PoE++ power supply and follow the IEEE 802.3af/at/bt standard to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SE2106PB is 118W, and the maximum PoE power supply power of a single port is 90W. Supports fast PoE and permanent PoE. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 8 x 10/100/1000/2500Mbps RJ45 ports (support standard PoE+ power supply) 1 x 1/2.5/10Gbps SFP+ port The maximum PoE power supply power of the whole machine is 115W, and the maximum PoE power supply power of a single port is 30W Compliant with IEEE 802.3af/at PoE power supply standard, the port supports power supply priority Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 2.5G port The TL-SE2109P provides 8 x 10/100/1000/2500Mbps RJ45 ports and 1 x 1/2.5/10Gbps SFP+ port. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. Supports standard PoE+ power supply function TL-SE2109P ports 1~8 support PoE+ power supply, follow the IEEE 802.3af/at standard, and meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SE2109P is 115W, and the maximum PoE power supply power of a single port is 30W. Supports fast PoE and permanent PoE. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 8 x 10/100/1000/2500Mbps RJ45 ports (support standard PoE++ power supply) 1 x 1/2.5/10Gbps SFP+ port The maximum PoE power supply power of the whole machine is 235W, and the maximum PoE power supply power of a single port is 90W Compliant with IEEE 802.3af/at/bt PoE power supply standards, the port supports power supply priority Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 2.5G port The TL-SE2109PB provides eight 10/100/1000/2500Mbps RJ45 ports and one 1/2.5/10Gbps SFP+ port. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. Supports standard PoE++ power supply function TL-SE2109PB ports 1~8 support PoE++ power supply and follow the IEEE 802.3af/at/bt standard to meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SE2109PB is 235W, and the maximum PoE power supply power of a single port is 90W. Supports fast PoE and permanent PoE. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 24 x 10/100/1000/2500Mbps RJ45 ports 2 x 1/2.5/10Gbps SFP+ ports Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 2.5G port The TL-SE2226 provides 24 x 10/100/1000/2500Mbps RJ45 ports and 2 x 1/2.5/10Gbps SFP+ ports. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. Device management is supported through the web interface

TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 24 x 10/100/1000/2500Mbps RJ45 ports (supports standard PoE++ power supply) 2 x 1/2.5/10Gbps SFP+ ports The maximum PoE power supply power of the whole machine is 498W, and the maximum PoE power supply power of a single port is 90W Compliant with IEEE 802.3af/at/bt PoE power supply standards, the port supports power supply priority Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 2.5G port The TL-SE2226PB provides 24 x 10/100/1000/2500Mbps RJ45 ports and 2 x 1/2.5/10Gbps SFP+ ports. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. Supports standard PoE++ power supply function TL-SE2226PB ports 1~24 support PoE++ power supply and follow the IEEE 802.3af/at/bt standard to meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SE2226PB is 498W, and the maximum PoE power supply power of a single port is 90W. Supports fast PoE and permanent PoE. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 16 x 10/100/1000/2500Mbps RJ45 ports 4 x 1/2.5/10Gbps SFP+ ports Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 2.5G port The TL-SE2420 provides 16 x 10/100/1000/2500Mbps RJ45 ports and 4 x 1/2.5/10Gbps SFP+ ports. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. Device management is supported through the web interface

TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management PoE switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios. 16 x 10/100/1000/2500Mbps RJ45 ports (support standard PoE++ power supply) 4 x 1/2.5/10Gbps SFP+ ports The maximum PoE power supply power of the whole machine is 498W, and the maximum PoE power supply power of a single port is 90W Compliant with IEEE 802.3af/at/bt PoE power supply standards, the port supports power supply priority Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection 2.5G port The TL-SE2420PB offers 16 x 10/100/1000/2500Mbps RJ45 ports and 4 x 1/2.5/10Gbps SFP+ ports. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. PoE port restart is supported, and the PoE terminal is downtime with one click When a PoE terminal goes down, you only need to remotely restart the PoE port corresponding to the terminal, which can easily solve the problem in one step, without the need for on-site hard restart, and get twice the result with half the effort. Supports standard PoE++ power supply function TL-SE2420PB ports 1~16 support PoE++ power supply and follow the IEEE 802.3af/at/bt standard to meet the needs of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. The maximum PoE power supply power of the TL-SE2420PB is 498W, and the maximum PoE power supply power of a single port is 90W. Supports fast PoE and permanent PoE. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.

TL-SE5226 is a 5-series 10 Gigabit uplink Layer 3 network management switch newly developed and launched by TP-LINK, which adopts a new generation of high-performance hardware and software platform, provides flexible full Gigabit access and cost-effective 10 Gigabit uplink ports, supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, is easy to manage and maintain, and is suitable for network aggregation layers such as smart hotels, enterprise campuses, and campuses. 24 x 10/100/1000/2.5G Base-T RJ45 ports 2 10 Gigabit SFP+ ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Dynamic and static routes are supported DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported 2.5G access, 10 Gigabit uplink TL-SE5226 can provide 24 x 2.5G RJ45 electrical ports and 2 x 10 Gigabit SFP+ optical ports, and support the combination of "2.5G Ethernet port + 10 Gigabit optical port", which is convenient for users to flexibly network and meet the networking needs of higher bandwidth and various scenarios. All ports have wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities It supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. Easy operation and maintenance It supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TL-SE5420 is a newly developed and launched 5 series 10 Gigabit uplink Layer 3 network management switch by TP-LINK, which adopts a new generation of high-performance hardware and software platform to provide flexible full Gigabit access and cost-effective 10 Gigabit access Mega uplink ports support Layer 3 routing protocols, complete security protection mechanisms, perfect ACL/QoS policies, and rich VLAN functions, which are easy to manage and maintain, and are suitable for network aggregation layers such as smart hotels, enterprise campuses, and campuses. 16 x 10/100/1000/2.5G Base-T RJ45 ports 4 10 Gigabit SFP+ ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Dynamic and static routes are supported DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported 2.5G access, 10 Gigabit uplink TL-SE5420 can provide 16 2.5G RJ45 electrical ports and 4 10 Gigabit SFP+ optical ports, and support the combination of "2.5G Ethernet port + 10 Gigabit optical port", which is convenient for users to flexibly network and meet the networking requirements of higher bandwidth and various scenarios. All ports have wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities It supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. Easy operation and maintenance It supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TL-SE5630 is a newly developed and launched 5 series 10 Gigabit uplink Layer 3 network management switch newly developed by TP-LINK, which adopts a new generation of high-performance hardware and software platform, provides flexible full Gigabit access and cost-effective 10 Gigabit uplink ports, supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, is easy to manage and maintain, and is suitable for network aggregation layers such as smart hotels, enterprise campuses, and campuses. 24 x 2.5G/1G/100M/10M adaptive RJ45 ports, 6 x 10G/2.5G/1G SFP+ ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, ARP proxy, and DHCP server Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported 2.5G access, 10 Gigabit uplink The TL-SE5630 can provide 24 2.5G RJ45 electrical ports and 6 10 Gigabit SFP+ optical ports, and supports the combination of "2.5G Ethernet port + 10 Gigabit optical port", which is convenient for users to flexibly network and meet the networking requirements of higher bandwidth and various scenarios. All ports have wire-speed forwarding capabilities to meet the needs of different users. Strong business processing capabilities It supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Complete security protection mechanism Supports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers. Versatile reliability protection Supports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability. Easy operation and maintenance It supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.

TL-SG1005+ is a molded 5-port Gigabit Ethernet switch with 5 x 10/100/1000M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, plug and play. 5 x 10/100/1000M adaptive RJ45 ports All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported Support MAC address self-learning and full-duplex working mode Desktop molded housing, plug and play, no management required Port performance Five 10/100/1000M adaptive RJ45 ports are provided, and all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Simple to use Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting.

TL-SG1005PB is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1-4 support PoE++ function, comply with IEEE 802.3bt/at/af standard, single-port PoE power up to 90W, and the maximum PoE output power of the whole machine is 242W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Simple and convenient to use, no configuration required, plug and play, can flexibly expand home and office networks without being limited by power line layout. Four 10/100/1000Base-T RJ45 ports support PoE++ power supply One 10/100/1000Base-T RJ45 uplink port Supports IEEE 802.3 bt/at/af PoE power supply standard The maximum PoE power supply power of the whole machine is 242W, and the maximum PoE power supply power of a single port is 90W PoE power delivery ports support the priority mechanism Full Gigabit ports Provides 5 x 10/100/1000Base-T RJ45 ports, including 4 PoE ports and 1 Uplink port. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Four 10/100/1000Base-T RJ45 ports support PoE++ power supply to meet the PoE power supply requirements of scenarios such as visual security, teleconferencing systems, and wireless coverage. It complies with IEEE 802.3bt/at/af PoE power supply standards, with a maximum PoE output power of 242W and a maximum PoE output power of 90W for a single port. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. The equipment is stable and reliable The low-power design of the host and the fan enhance heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power), power warning light (PoE Max), and port status indicator (Link/Act).

TL-SG1005PE is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1-4 support PoE+ function, comply with IEEE 802.3af/at standard, single-port PoE power up to 30W, and the maximum PoE output power of the whole machine is 62W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Simple and convenient to use, no configuration required, plug and play, can flexibly expand home and office networks without being limited by power line layout. Four 10/100/1000Base-T RJ45 ports support PoE+ power supply One 10/100/1000Base-T RJ45 uplink port The maximum PoE power supply power of the whole machine is 62W, and the maximum PoE power supply power of a single port is 30W PoE power delivery ports support the priority mechanism Full Gigabit ports Provides 5 x 10/100/1000Base-T RJ45 ports, including 4 PoE ports and 1 Uplink port. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Four 10/100/1000Base-T RJ45 ports support PoE+ power supply to meet the PoE power supply requirements of visual security, teleconferencing systems, wireless coverage and other scenarios. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 62W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. The equipment is stable and reliable The low-power design of the main machine, the all-steel shell naturally dissipates heat, and the stable operation of the product can be ensured without fan, and it is quieter without noise. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. The user can easily understand the working status of the device through the power indicator (Power) and the port status indicator (Link/Act).

TL-SG1008+ is a molded case 8-port Gigabit Ethernet switch, providing 8 x 10/100/1000M adaptive RJ45 ports, all ports support wire-speed forwarding and MDI/MDIX auto-flip function, plug and play. 8 x 10/100/1000M adaptive RJ45 ports All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported Support MAC address self-learning and full-duplex working mode Desktop molded housing, plug and play, no management required Port performance Eight 10/100/1000M adaptive RJ45 ports are provided, and all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Simple to use Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting.

TL-SG1008-TN67 industrial grade is a EN50155 industrial Ethernet switch specially designed and developed by TP-LINK for rail transit, shipbuilding, vehicle communication and other applications. Tight and secure connections with M12 connectors allow them to work reliably even in the face of environmental factors such as vibration and shock. 8 x 10/100/1000M adaptive M12 ports (8pin, A-code, female) 1 x M12 power port with dual redundant power inputs (4pin, A-code, male) EN50155 standard shock and vibration resistant IP66 industrial protection level is dustproof and waterproof Operating temperature: -40°C~75°C, fanless design, more reliable heat dissipation Dual redundant wide voltage input: 24V~110VDC, which greatly improves the reliability of product power supply Multiple installation methods: rail installation + wall mounting Plug and play, no configuration required EMC high protection level, not afraid of all kinds of harsh environments *This model does not come with power supply/wiring at the factory, so it needs to be purchased separately; The Gigabit Ethernet port can be used with TL-M12A8-M, and the power port can be used with TL-M12A4-F It meets EN50155 standards and is suitable for applications in rail vehicles, ships and other fields The M12 connector is tightly and firmly connected, which can also ensure the stable operation of network equipment in high-vibration and high-impact environments, and has the ability to operate under extreme altitude, temperature and humidity, and can adapt to different environmental differences such as shock, vibration, surge and electrical performance, making it an ideal choice for various industrial applications. IEC/EN 61000-4 high standard industrial grade protection, IP66 dust and water resistance High-standard electromagnetic anti-interference protection design, suitable for various harsh electromagnetic environments such as electric power and industrial plants. The metal shell, M12 aviation joint, and internal glue pouring greatly improve the anti-corrosion performance of the equipment. IP66 dustproof and waterproof to meet the needs of harsh industrial environments. -40°C~75°C wide temperature operation, natural heat dissipation, no fear of extreme temperatures TL-SG1008-TN67 industrial grade is designed in strict accordance with the working temperature of -40~75°C, and adopts natural heat dissipation mode to ensure that the equipment works stably for a long time in this temperature range without packet loss, and meets the needs of various harsh environments. 24V~110VDC wide voltage input, multiple power supply protection It supports two power supplies to be connected at the same time, and the power supply is redundant to ensure the uninterrupted work of the equipment. It supports a wide voltage input of 24V~110VDC, and is suitable for various industrial power supplies. Three types of power protection are provided to greatly improve the reliability of power supply to the switch. Selected devices, with high standards of system design and production control The PCB board is made of electroless nickel gold plate, which has high corrosion resistance, oxidation resistance, and excellent electrical properties. Select high-specification and long-life Japanese capacitors to greatly improve the service life of the product. The circuit design of the highly redundant system avoids the sudden change of the external environment from affecting the normal operation of the equipment. TP-LINK's rigorous industrial-grade production and testing process is adopted to greatly improve the reliability of the equipment. Compact metal body, rugged and efficient The size of the TL-SG1008-TN67 industrial grade body is only 185*170*50mm, which can be easily installed in a compact distribution box. The housing is designed to dissipate heat naturally, so it can be protected without a fan The product is stable and quiet, noiseless and quiet, and adapts to various harsh industrial environments. Unmanaged switch, plug and play, no configuration required

TL-SG1016T is a fully gigabit unmanaged Ethernet switch product independently developed by TP-LINK, providing 16 10/100/1000M RJ45 ports with wire-speed forwarding capability per port. This series of switches provides different working modes for applications such as visual security, diskless boot and wireless networking, and has good network adaptability. 16 x 10/100/1000M adaptive RJ45 ports All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported It provides three working modes: standard switching, VLAN isolation, and network cloning The switch can be switched by flipping the switch Plug and play, rack-mountable Port performance 16 x 10/100/1000M adaptive RJ45 ports, all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Three modes of operation It provides a mode switching switch, which supports three working modes: "standard switching", "VLAN isolation" and "network cloning", which can optimize and support various application scenarios such as visual security, diskless boot and wireless networking. Simple to use 19-inch standard rack-mounted, plug-and-play, no management required, and dynamic LED indicators provide simple working status alerts and troubleshooting.

TL-SG1210P is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1~8 support PoE+ function, in line with IEEE 802.3af/at standard, single-port PoE power up to 30W, and the maximum PoE output power of the whole machine is 57W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, simple and convenient to use, suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to build cost-effective PoE networks. Eight 10/100/1000Base-T RJ45 ports support PoE+ power supply 1 x 10/100/1000Base-T RJ45 port and 1 x independent Gigabit SFP port The maximum PoE power supply power of the whole machine is 57W, and the maximum PoE power supply power of a single port is 30W PoE power delivery ports support the priority mechanism It supports three working modes: video surveillance, VLAN isolation, and standard switching Full Gigabit ports Provides 9 x 10/100/1000Base-T RJ45 ports and 1 x independent Gigabit SFP port. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Eight 10/100/1000Base-T RJ45 ports support PoE+ power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 57W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. Three modes of operation The standard switching mode ---- all ports communicate freely, which is suitable for common data transmission environment; The video surveillance mode ---- specially designed for surveillance application scenarios to improve the stuttering and mosaic phenomenon in the surveillance network. VLAN isolation mode --- suitable for scenarios where wireless APs are connected, suppressing network storms and improving network performance. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TL-SG1210PE is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1~8 support PoE+ function, in line with IEEE 802.3af/at standard, single-port PoE power up to 30W, the maximum PoE output power of the whole machine is 120W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, simple and convenient to use, suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to build cost-effective PoE networks. 8 x 10/100/1000Base-T RJ45 ports (PoE+ power supply) 1 x 10/100/1000Base-T RJ45 port and 1 x independent Gigabit SFP port The maximum PoE power supply power of the whole machine is 120W, and the maximum PoE power supply power of a single port is 30W PoE power delivery ports support the priority mechanism Full Gigabit ports Provides 9 x 10/100/1000Base-T RJ45 ports and 1 x independent Gigabit SFP port. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function Eight 10/100/1000Base-T RJ45 ports support PoE+ power supply to meet the requirements of PoE power supply in scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 121W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. The equipment is stable and reliable The low-power design of the host and natural heat dissipation ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power) and port status indicator (Link/Act).

TL-SG1226 is a Layer 2 fully gigabit unmanaged Ethernet switch product independently developed by TP-LINK, providing 24 x 10/100/1000M RJ45 ports and 2 Gigabit SFP fiber module expansion slots, with line-speed forwarding capability per port. This series of switches provides different working modes for applications such as visual security, diskless boot and wireless networking, and has good network adaptability. 24 x 10/100/1000M adaptive RJ45 ports, 2 x Gigabit SFP fiber module expansion slots All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported It provides three working modes: standard switching, VLAN isolation, and network cloning to adapt to different network environments The switch can be switched by flipping the switch Plug and play, rack-mountable Port performance It provides 24 x 10/100/1000M adaptive RJ45 ports and 2 Gigabit SFP fiber module expansion slots, all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Three modes of operation It provides a mode switching switch, which supports three working modes: "standard switching", "VLAN isolation" and "network cloning", which can optimize and support various application scenarios such as visual security, diskless boot and wireless networking. Simple to use The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting.

TL-SG1226PE is a fully gigabit unmanaged PoE switch independently developed by TP-LINK, in which ports 1~24 support PoE+ function, in line with IEEE 802.3af/at standard, single-port PoE power up to 30W, and the maximum PoE output power of the whole machine is 375W. It supports three working modes: standard switching, video surveillance, and VLAN isolation. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Plug-and-play, simple and convenient to use, suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to build cost-effective PoE networks. Full Gigabit ports Provides 24 x 10/100/1000Base-T RJ45 ports and 2 independent Gigabit SFP ports. All ports support Gigabit non-blocking line-rate forwarding for smoother transmission. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. PoE power supply function The 24 10/100/1000Base-T RJ45 ports support PoE+ power supply to meet the PoE power supply requirements for scenarios such as visual security, teleconferencing systems, and wireless coverage. In line with the IEEE 802.3af/at PoE power supply standard, the maximum PoE output power of the whole machine is 375W, and the maximum PoE output power of a single port is 30W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading. Three modes of operation The standard switching mode ---- all ports communicate freely, which is suitable for common data transmission environment; The video surveillance mode ---- specially designed for surveillance application scenarios to improve the stuttering and mosaic phenomenon in the surveillance network. VLAN isolation mode --- suitable for scenarios where wireless APs are connected, suppressing network storms and improving network performance. The equipment is stable and reliable The low-power design of the host and the fan strengthen the heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. It's easy to use Plug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power), PoE power warning indicator (PoE Max), port status indicator (Link/Act), and rate indicator (1000Mbps).